Multi-Link ML-100, ML-001 manual Introduction, Overview, FCC Information Consumer Information

INTRODUCTION

Overview

Congratulations on your purchase of a Home Smart Center. This is a security control panel which not only functions as a security system, but also monitors your premises by giving you alert notification when the system is not armed. It is also a home automation center, which allows you to remotely control house- hold appliances and lights, even when you are away from home. It can be controlled by dialing in from any touch tone phone, which makes it even more convenient and powerful. Additional accessories such as different kinds of sensors and controllers can be added to suit your specific needs.

This user instructions will guide you through the whole setup procedure as well as all the programming instructions. Please follow the instructions closely, you should find it very easy to set up the system.

FCC Information

Consumer Information:

a) This equipment complies with Part 68 of the FCC rules and the require-

ments adopted by the ACTA. On the bottom of this equipment is a label

that contains, among other information, a product identifier in the format

US:AAAEQ##TXXXX. If requested, this number must be provided to the

telephone company.

b) An applicable certification jacks Universal Service Order Codes (USOC)

for the equipment is provided (i.e., RJ11C) in the packaging with each

piece of approved terminal equipment.

c) A plug and jack used to connect this equipment to the premises wiring

Alert

When Home (System Not Armed)

Beep Beep

Alarm

Not Home (System Armed)

Alarm

Automation

Communicator

Zone 1

Sensor 1

Triggered

and telephone network must comply with the applicable FCC Part 68

rules and requirements adopted by the ACTA. A compliant telephone

cord and modular plug is provided with this product. It is designed to be

connected to a compatible modular jack that is also compliant. See

installation instructions for details.

d) The REN is used to determine the number of devices that may be con-

nected to a telephone line. Excessive RENs on a telephone line may

result in the devices not ringing in response to an incoming call. In most

but not all areas, the sum of RENs should not exceed five (5.0). To be

certain of the number of devices that may be connected to a line, as

determined by the total RENs, contact the local telephone company. [For

products approved after July 23, 2001, the REN for this product is part of

In the package, you should find the following items:

•One Control Panel

ML-001A

• One Motion Sensor (For ML-100A Only)

PS-101

• Two Door / Window Sensors (For ML-100A Only)

the product identifier that has the format US:AAAEQ##TXXXX. The digits

represented by ## are the REN without a decimal point (e.g., 03 is a

REN of 0.3). For earlier products, the REN is separately shown on the label.]

e) If this equipment AM-002 causes harm to the telephone network, the

telephone company will notify you in advance that temporary discontinu-

ance of service may be required. But if advance notice isn’t practical, the

telephone company will notify the customer as soon as possible. Also,

you will be advised of your right to file a complaint with the FCC if you

believe it is necessary.

f) The telephone company may make changes in its facilities, equipment,

• One Keychain Remote (For ML-100A Only)

WD-101

4B-101

operations or procedures that could affect the operation of the equipment.

If this happens the telephone company will provide advance notice in

order for you to make necessary modifications to maintain uninterrupted

service.

–4– –53–