Muratec MFX-3050 manual Control panel overview

Control panel overview

MFX-3050

1Speed buttons: Allows you to store frequently-dialed fax numbers and email addresses and enter them with the touch of a few buttons.

13Back: Sends you back to the upper menu level.

2Shift: Allows you to shift the speed buttons to access numbers 16 through 30.

14Status: Shows the status of your machine. See page 1.5.

3Address Book: Allows you to store frequently used fax numbers in memory or search for stored fax numbers or email addresses. Also allows you to print an Address Book/Phone Book list.

15Darkness: Adjusts the document brightness for the current copy job.

4	Resolution: Adjusts the document resolution for the current fax job.	16	Original Type: Selects the document type for the current copy job.
5	Redial/Pause: In Standby mode, redials the last number, or in Edit	17	Reduce/Enlarge: Makes a copy smaller or larger than the original.
	mode, inserts a pause into a fax number.

6Fax: Activates Fax mode.

18USB Print: Allows you to directly print files stored on a USB Memory device when it is inserted into the USB memory port on the front of your machine.

7	Copy: Activates Copy mode.	19	Duplex: Allows you to print documents on both sides of the paper.
8	Scan/Email: Activates Scan mode.	20	Toner Save: Allows you to save on toner by using less toner in
			printing.
9	Display: Shows the current status and prompts during an operation.	21	Number keypad: dials a number or enters alphanumeric characters.
10	Menu: Enters Menu mode and scrolls through the available menus.	22	On Hook Dial: Engages the telephone line.

11Scroll buttons: Scroll through the options available in the selected menu, and increase or decrease values.

23Stop/Clear: Stops an operation at any time. In Standby mode, clears/cancels the copy options, such as the darkness, the document type setting, the copy size, and the number of copies.

12 OK: Confirms the selection on the screen. 24 Start: Starts a job.

1.3 <Introduction>