Muratec MFX-3050 manual Troubleshooting

Message	Meaning	Suggested solutions
Retry Redial?	The machine is	You can press OK to
	waiting for a	immediately redial, or
	specified time	Stop/Clear to cancel the
	interval to redial a	redial operation.
	previously busy
	station.
Scanner locked	The scanner module	Unlock the scanner and
	is locked	press Stop/Clear.
Self Diagnostic	The LSU (Laser	Please wait a few
LSU	Scanning Unit) in	minutes.
	your printer is
	checking some
	problems detected.
Self Diagnostic	The engine in your	Please wait a few
Temperature	machine is checking	minutes.
	some problems
	detected.
Send Error	There is a problem	Configure the
(AUTH)	in SMTP	authentication setting.
	authentication.
Send Error	There is a problem	Configure the DNS
(DNS)	in DNS.	setting.
Send Error	There is a problem	Configure the POP3
(POP3)	in POP3.	setting.
Send Error	There is a problem	Change to the available
(SMTP)	in SMTP.	server.
Send Error	There is a problem	Configure your network
(Wrong Config)	on the network	interface card correctly.
	interface card.
[Stop Pressed]	Stop/Clear has	Try again.
	been pressed during
	a fax transmission.
Tray 1	There is no paper in	Load paper in the tray 1.
Paper Empty	the tray 1.	See page 5.5.
Tray 2	There is no paper in	Load paper in the
Paper Empty	the optional tray 2.	optional tray 2. See page
		5.5.

14.9 <Troubleshooting>