Muratec MFX-3050 manual Cleaning your machine, Clearing memory, Cleaning the outside, Cautions

Clearing memory

You can selectively clear information stored in your machine’s memory.

Caution

Before clearing the memory, make sure that all fax jobs have been completed, or you will lose those jobs.

1Press Menu until System Setup appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Clear Setting appears and press OK.

3Press the Scroll buttons until the item you want to clear appears.

Options	Description
All Settings	Clears all of the data stored in memory and
	resets all of your settings to the factory default.
Fax Setup	Restores all of the fax options to the factory
	default.
Copy Setup	Restores all of the copy options to the factory
	default.
Scan Setup	Restores all of the scan options to the factory
	default.
System Setup	Restores all of the system options to the
	factory default.
Network	Restores all of the network options to the
	factory default.
Address Book	Clears all of the fax number and email address
	entries stored in memory.
Send Report	Clears all records of sent faxes and emails.
Fax Rcv	Clears all records of received faxes.
Report
NetScan	Clears the information on network scan
Report	sessions in memory.

4Press OK when Yes appears.

5Press OK again to confirm clearing.

6Repeat steps 3 through 5 to clear another item.

7Press Stop/Clear to return to Standby mode.

Cleaning your machine

To maintain print and scan quality, follow the cleaning procedures below each time the toner cartridge is replaced or if print and scan quality problems occur.

Caution

Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvent, or other strong substances can discolor or distort the cabinet.

Cleaning the outside

Clean the cabinet of the machine with a soft lint-free cloth. You can dampen the cloth slightly with water, but be careful not to let any water drip onto or into the machine.

Cleaning the inside

During the printing process, paper, toner, and dust particles can accumulate inside the machine. This buildup can cause print quality problems, such as toner specks or smearing. Cleaning the inside of the machine clears or reduces these problems.

1Turn the machine off and unplug the power cord. Wait for the machine to cool down.

2Open the front cover and pull the toner cartridge out. Set it on a clean flat surface.

Cautions

•To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.

•Do not touch the green surface underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.

13.2 <Maintenance>