Muratec MFX-3050 manual Changing the default copy settings, Using special copy features, Collation

Reduced or enlarged copy

By using the Reduce/Enlarge button, you can reduce or enlarge the size of a copied image from 25% to 400% when you copy original documents from the scanner glass, or from 25% to 100% from the ADF.

To select from the predefined copy sizes:

1Press Reduce/Enlarge.

2Press Reduce/Enlarge or the Scroll buttons until the size setting you want appears and press OK.

To scale the copy by directly entering the scale rate:

1Press Reduce/Enlarge.

2Press Reduce/Enlarge or the Scroll buttons until Custom appears and press OK.

3Enter the scale rate and press OK to save the selection.

Note

When you make a reduced copy, black lines may appear at the bottom of your copy.

Changing the default copy settings

The copy options, including darkness, original type, copy size, and number of copies, can be set to those most frequently used. When you copy a document, the default settings are used unless they have been changed by using the corresponding buttons on the control panel.

1	Press Copy.
2	Press Menu until Copy Setup appears on the bottom line of the

Using special copy features

You can use the following copy features:

Collation

You can set the machine to sort the copy job. For example, if you make 2 copies of a 3 page original, one complete 3 page document will print followed by a second complete document.

1Press Copy.

2 Load originals face up into the ADF.

For details about loading an original, see page 5.1.

3Enter the number of copies using the number keypad.

4Press Menu until Copy Feature appears on the bottom line of the display and press OK.

5Press OK when Copy Collation appears.

6Press the Scroll buttons to select Yes.

7Press OK or Start to begin copying.

One complete document will print followed by the second complete document.

2-up or 4-up copying

	display and press OK.
3	Press OK when Change Default appears.
4	Press the Scroll buttons until the setup option you want appears
	and press OK.
5	Press the Scroll buttons until the setting you want appears and
	press OK.

2

1

2-up copying

Your machine can print 2 or 4 original images reduced to fit onto one sheet of paper.

1Press Copy.

2Load originals face up in the ADF.

For details about loading an original, see page 5.1.

6	Repeat steps 4 through 5, as needed.
7	Press Stop/Clear to return to Standby mode.

Note

While you are setting copy options, pressing Stop/Clear cancels the changed settings and restores the defaults.

1 2

3 4

4-up copying

3Press Menu until Copy Feature appears on the bottom line of the display and press OK.

4Press the Scroll buttons until 2-Upor 4-Upappears and press OK.

5Press the Scroll buttons to select Yes.

6Press OK or Start to begin copying.

Note

You cannot adjust the copy size using the Reduce/Enlarge button for making a 2- or 4- up copy.

6.2 <Copying>