Muratec MFX-3050 manual Checking replaceables, Replacing the ADF rubber pad

Checking replaceables

If you experience frequent paper jams or printing problems, check the number of pages the machine has printed or scanned. Replace the corresponding parts, if necessary.

The following information are available for checking the replaceable elements of your machine:

•Total: displays the total number of pages printed.

•Toner: displays how much toner remains in the cartridge.

•Drum: displays the number of pages printed.

•Platen Scan: displays the number of pages scanned using the scanner glass.

Note

While the following messages are appearing on the display, the sub-menu(s) under Supplies Life can be changed:

-Invalid Toner

-NonGenuine Toner

-Replace Toner

-Toner Exhausted

To check the replaceables:

1Press Menu until System Setup appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Maintenance appears and press OK.

3Press the Scroll buttons until Supplies Life appears and press OK.

4Press the Scroll buttons until the item you want appears and press OK.

5If you selected to print a supply information page, press OK to confirm.

6Press Stop/Clear to return to Standby mode.

Replacing the ADF rubber pad

You will need to replace the ADF rubber pad when there seems to be a consistent problem with paper pickup or when its specified yield is reached.

1Open the ADF cover.

2Rotate the bushing on the right end of the ADF roller toward the ADF and remove the roller from the slot.

1

2

1 bushing

2 ADF roller

3Remove the ADF rubber pad from the ADF, as shown.

1

1 ADF rubber pad

4Insert a new ADF rubber pad into place.

13.7 <Maintenance>