Muratec MFX-3050 manual Clearing paper jams, Roller misfeed, In the tray, scanner lid

Roller misfeed

1Open the scanner lid.

2Seize the misfed paper, and remove the paper from the feed area by carefully pulling it to the right using both hands.

1

1 scanner lid

3Close the scanner lid. Then load the removed pages back into the ADF.

Clearing paper jams

When a paper jam occurs, Paper Jam appears on the display. Refer to the table below to locate and clear the paper jam.

Message	Location of jam	Go to
[Paper Jam 0]	In the paper feed area (tray 1,	below and
Open/Close Door	optional tray 2, or multi-	page 14.3
	purpose tray)
[Paper Jam 1]	In the fuser area or around the	page 14.3
Open/Close Door	toner cartridge
[Paper Jam 2]	In the paper exit area	page 14.4
Check Inside
[Duplex Jam 0]	In the duplex unit	page 14.5
Check Inside
[Duplex Jam 1]	Between the duplex unit and	page 14.6
Check Inside	fuser area

Caution

To avoid tearing the paper, pull out the jammed paper gently and slowly. Follow the instructions in the following sections to clear the jam.

In the tray 1

1Open and close the front cover. The jammed paper is automatically ejected from the machine.

If the paper does not exit, go to the next step.

2Pull the tray 1 open.

3Remove the jammed paper by gently pulling it straight out.

If the paper does not move when you pull, or if you do not see the paper in this area, check the fuser area around the toner cartridge. See page 14.3.

4Insert the tray 1 into the machine until it snaps into place. Printing automatically resumes.

14.2 <Troubleshooting>