Muratec MFX-3050 manual Using USB flash memory, About USB memory, Plugging in a USB memory device

11 Using USB flash memory

This chapter explains how to use a USB memory device with your MFX-3050.

This chapter includes:

•About USB memory

•Plugging in a USB memory device

•Scanning to a USB memory device

•Printing from a USB memory device

•Backing up data

•Managing USB memory

About USB memory

USB memory devices are available with a variety of memory capacities to give you more room for storing documents, presentations, downloaded music and videos, high resolution photographs, or whatever other files you want to store or move.

You can do the following on your machine using a USB memory device:

•Scan documents and save them on a USB memory device.

•Print data stored on a USB memory device.

•Back up Address Book/Phone Book entries and the system settings of your machine.

•Restore backup files to the machine’s memory.

•Format the USB memory device.

•Check the available memory space.

Plugging in a USB memory device

The USB memory port on the front of your machine is designed for USB V1.1 and USB V2.0 memory devices. Your machine supports USB memory devices with capacity of up to 512 MB.

You must use only an authorized USB memory device with an A plug type connector.

Use only a metal/shielded

USB memory device.

Note

There are two USB plug types.

Insert a USB memory device into the USB memory port on the front of your machine.

Cautions

• Do not remove the USB memory device while the machine is in operation, or writing to or reading from USB memory. This may damage your machine.

•If your USB memory device has certain features, such as security settings and password settings, your machine may not automatically detect it. For details about these features, see the device’s User’s Guide.

Scanning to a USB memory device

You can scan a document and save the scanned image onto a USB memory device. There are two ways of doing this: you can scan to the device using the default settings, or you can customize your own scan settings.

Scanning

1Insert a USB memory device into the USB memory port on your machine.

2Load originals face up into the ADF, or place a single original face down on the scanner glass.

For details about loading an original, see page 5.1.

3Press Scan/Email.

4Press OK when Scan to USB appears on the bottom line of the display.

11.1 <Using USB flash memory>