Chapter1 Introduction
NI5102 User Manual 1-6 ni.com
PXI-specificfeatures, RTSI bus trigger, RTSI Clock, and Serial
Communicationare implemented on the J2 connector of the CompactPCI
bus.Table 1-1 lists the J2 pins used by your NI 5102 (PXI) digitizer, which
is compatible with any CompactPCI chassis with a sub-busthat does not
drivethese lines. Even if the sub-bus is capable of driving these lines, the
NI5 102 (PXI) is still compatible as long as those pins on the sub-bus are
disabledby default and are never enabled. Damage can result if these lines
aredrivenbythesub-bus.
Optional Equipment
NIoffers a variety of products to use with your digitizer, including probes,
cables,and otheraccessories, as follows:
•Cables for master/slavetiming a nd triggering
•Cables for external triggering
•RTSIbus cables for NI 1502 (PCI, ISA)
•AUXInterface Cables for NI 5102 (PXI) only
Formore specific information about these products, refer to the NI catalog
orw ebsite,or call theoffice nearest you.
Table1-1. NI 5102 (PXI) J2 Pin Assignment
NI 5102 (PXI)
Signal PXI Pin Name PXI J2 Pin Number
RTSITrigger <0..5> PXITrigger <0..5> B16,A16, A17, A18,
B18,C18
RTSITrigger 6 PXIStar D17
RTSIClock PXI Trigger(7) E16
Serial
Communication
LBR (6, 7, 8, 9, 10,
11,12)
EI5,A3 , C3, D3, E3,
A2,B2