Chapter3 I/OInformation
©NationalInstruments Corporation 3-9 NI8171 Series User Manual
Trigger
The TRG connector is the software-controlled trigger connection for
routing PXI triggers to or from the backplane trigger bus.
Figure 3-7 showsthe TRG connector locatio no n the NI 8171 series.
Table3-8 lists and describes the trigger connector signals.
Figure3-7. TRGConnector Location and Pinout
Table3-8. TRGConnector Signals
Pin Signal Name Signal Description
1TRIG Trigger
2 (Shield) GND Ground
1
2