NEC NDA-24233 manual Ndsr, Checking My Number Registration

VisuaLink 128/384 Engineering GuideConsole Command List

NDSR Checking My Number Registration 5-2

Description:	Checks the current local dial number setting. In a communication, a local
	dial number is reported to the remote site at a call origination. This is used
	to check a local dial number set by a NDSS command.
Command Format:	NDSR [p1]
	p1:	L11	: line 1 dial No. 1
		L12	: line 1 dial No. 2
		L21	: line 2 dial No. 1
		L22	: line 2 dial No. 2
		L31	: line 3 dial No. 1
		L32	: line 3 dial No. 2
Response:	Normal Response: p1 p2 OK
	p1:	L11		: line 1 dial No. 1
		L12		: line 1 dial No. 2
		L21		: line 2 dial No. 1
		L22		: line 2 dial No. 2
		L31		: line 3 dial No. 1
		L32		: line 3 dial No. 2
	p2:	0-9		: dial Number (within 20 digits)
				: sub address (within 8 digits)
		*		: dial number/sub address separating code
		No Entry		: Registration Deleted
		Local Dial Format: dial number * Sub Address
	Error Response:		ERR01
			ERR05
			ERR07
			ERR41
			ERR87

Note: If p1 is omitted, the default is L11.

NDA-24233 Issue 2 Page 3-23