NEC NDA-24233 manual Ndss, Registering My Number

Console Command List VisuaLink 128/384 Engineering Guide

3.5 ISDN Registering/Setting Command

NDSS Registering My Number 5-1

Description:	Registers a local dial number. In a communication, a local dial number is
	reported to the remote site at a call origination. The local number to report
	at this time is registered. The number of digit that can be registered is 20
	digits for dial number and 8 digits for a sub address at a maximum.
Command Format:	NDSS [p1] p2 p3

p1:	L11	: line 1 dial No. 1
	L12	: line 1 dial No. 2
	L21	: line 2 dial No. 1
	L22	: line 2 dial No. 2
	L31	: line 3 dial No. 1
	L32	: line 3 dial No. 2
p2:	0-9	: dial Number (within 20 digits)
		: sub address (within 8 digits)
	*	: dial number/sub address separating code
	Off	: Registration Deleted
	Local Dial Format: dial number * Sub Address
p3:	0-9

Note 1: If p1 is omitted, the default is L11.

Note 2: If VL128, setting L21 to L32 results in error.

Response:	Normal Response:	OK
	Error Response:	ERR01

Page 3-22 NDA-24233 Issue 2