Advanced > LAN
Configure the NB9/NB9W’s LAN IP address and subnet mask. Save button only saves the LAN configuration data. Save/Reboot button saves the LAN configuration data and reboots the NB9/NB9W to make the new configuration effective.
Field
Means
LAN IP Address | Default: 192.168.1.1. The LAN IP address of your NB9/NB9W. |
|
|
LAN Subnet Mask | Default: 255.255.255.0. The subnet mask of your NB9/NB9W. A subnet mask is used to |
| determine what subnet an IP address belongs to. For more information on subnetting see |
| http://www.ralphb.net/IPSubnet/. |
|
|
Enable UPnP | Universal plug and play (UPnP) allows traffic to pass through the NB9/NB9W for applications |
| using the UPnP protocol. This feature requires one active WAN connection. In addition, the |
| client connecting to the NB9/NB9W should support this feature. |
| UPnP also supports NAT Traversal which can automatically solve many |
| communications problems. UPnP enables applications to assign dynamic port mappings to |
| the NB9/NB9W and delete them when connections are complete. |
| A typical example is the MSN Messenger application that runs on Windows. Instead of |
| manually setting up the port mappings UPnP enables MSN Messenger to make the request |
| to the NB9/NB9W which will setup these ports dynamically. When MSN Messenger is closed |
| the port openings will be removed from the NB9/NB9W’s configuration. |
| Configure the second IP address and subnet mask for LAN interface. It is possible to |
| configure the second IP address to access the NB9/NB9W on. Once this box is checked you |
| are able to enter the IP address and subnet mask. |
|
|
Disable DHCP Server | Disables the DHCP server. Only to be done if Static IP address is set up. |
|
|
Enable DHCP Server | Default: Enabled. |
|
|
Start IP Address | Default: 192.168.1.2. The first IP address that will be issued to the first DHCP client |
| connecting to the NB9/NB9W using Ethernet cable or wirelessly. |
|
|
End IP Address | Default: 192.168.1.254. The last IP address in the DHCP pool to be issued to DHCP clients |
| connecting to the NB9/NB9W. |
|
|
Lease Time | Default: 24 hours. The time an IP address is assigned to a client before being renewed. |
|
|
46 | NB9/NB9W ADSL2+ VoIP Router |
| YML790 Rev8 |
