RJ11 connector and cable, To RJ-11 adapter | NetComm NB600W instruction

RJ11 connector and cable

An RJ-11 connector is the small, modular plug used for most analog telephones. It has six pin slots in the head, but usually only two or four of them are used.

RJ-11 Connector
Pin Assignment	Normal Assignment

1	Signal Ground
2	CTS
3	RXD
4	TXD
5	+5 Volts In
6	Signal Ground

Figure 5

605 to RJ-11 adapter

The 605 to RJ-11 adaptor is provided to comply with the older 610 Telstra wall socket. The 605 to RJ-11 adapter may be used to convert the supplied RJ-11 cable, if the older connection is required.

NB600W Super-G Wireless Broadband Gateway User Guide	YML775 Rev1
66	www.netcomm.com.au

Image 66

NetComm NB600W manual RJ11 connector and cable, To RJ-11 adapter

Contents

Page Legal & Regulatory Information Customer InformationImportant rules for safe operation NB600W Super-G Wireless Broadband Gateway User Guide Contents Introduction Product Overview Features and benefits NetComm NB600W Super-G Wireless Gateway What’s in the package? Connect the Power Cable Connecting the NetComm Super-G Wireless GatewayConnecting your Gateway Connect the Ethernet Cables Factory Default Device1 NB600W Front Panel 2 NB600W Back Panel Log-in Default Values Management / Gateway Address Configuring your Computers Overview Configuring Windows 98 and Millennium PCs Page Configuring Windows 2000 PCs Page Configuring Windows XP PCs Page Configuring the Wireless Gateway Accessing the Configuration ManagerHttp//192.168.1.1 Basic Configuration Internet Port Use Static DNS Dhcp ConfigurationHost Name/Domain Name MAC address Service Name PPPoE ConfigurationPassword &Confirm Password Packet Size MTU Field Gateway Static IP ConfigurationIP Address Primary DNS Pptp Configuration Password & Confirm PasswordServer IP Default value is 1492 Bytes. If your ISP requires a Local Port Start IP addressNumber of IP address Lease Time Static Dhcp IP & MAC AddressWins Server Region Wireless LANHide Ssid Channel Enable Wireless Access List Security Mode WPA Pre-Shared Key Ral Key Integrity Protocol. Tkip utilizes a stronger 802.1x Radius User Group Advanced Setup Access Control ListAdvanced Items Application Define Group Options Group NameEvery IP address This IP address IP Address Range Protocol Define Application OptionsApplication name Port Range/Port Number Block URLs With IP Address Advanced Setup Content filteringBlock URLs By Keyword Block Java Applets Schedule Block CookiesBlock Download File Trust User Advanced Setup Dynamic DNS Update Status Advanced Setup Firewall Email Alarm Options Return Address Mail logTime Advanced Setup Remote Management Password, Confirm PasswordWeb Management Port Allow Management from PC Send System Log to this PC Advanced Setup Static Routes Destination Network / Host Advanced Setup UPnP Enable UPnP Advanced Setup Virtual Server Server IP address Port Range Port Number Management Access Log Management Management Factory Reset NB600W Management Firmware Upgrade Connect/Renew Management Network StatusRefresh Disconnect/Release User List Session List Management Save Configuration Management Time Appendix a Technical Specifications Dimensions & Weight Hardware Software Wireless SecurityWeb Contents Filtering Networking /Transport layer protocol Management What is Dynamic DNS? Why Dynamic DNS? What is Wildcard? What is a dynamic IP address?What is DMZ? Appendix B Frequent Asked Questions What’s MX Mail Exchanger? And why MX? What is PPPoE PPP Over Ethernet?What is MTU? Refresh your IP address MS Windows Appendix C TroubleshootingCannot access the Internet IP address conflict Appendix D Ddns Update Status Messages Appendix E Cable Connections RJ-45 Network Ports Straight and crossover cable configuration Straight-Through CablingCross-Over Cabling RJ11 connector and cable To RJ-11 adapter Appendix F Registering your NetComm Product Legal & Regulatory InformationContact Information Customer Information Product Warranty Limitations of Warranty YML775 Rev1