1.4 Connecting the NetComm Super-G Wireless Gateway
A typical Internet access application of the NB600W Gateway is shown below:
Connecting your Gateway
Site Selection
Before installation, select the Wireless Gateway location. Proper placement of the Gateway is critical to ensure optimum radio range and performance. You can use the Site Survey Utility to help you to determine the best location. Typically, the best location to place your Gateway is at the center of your wireless coverage area. Try to place your mobile stations within the line of sight. Obstructions may impede performance of the Gateway.
Connect the Ethernet Cables
WAN (Internet) Port
Connect to your broadband (Cable Modem or ADSL Modem) access equipment.
LAN (Local) Ports
Connect via ethernet cable to your local server or workstations (PCs).
Connect the Power Cable
Connect the power adapter to the power socket on the Gateway, and plug the other end of the power into an electrical outlet. The Gateway will be powered on and all five indicators on the top panel will flash in sequence to test the functionality of the indicators.
NB600W | YML775 Rev1 |
8 | www.netcomm.com.au |
