Configuring Switching Information
159
ProSafe M5300 Switch
IGMP Snooping Configuration
Use the IGMP Snooping Configuration page to configure the parameters for IGMP snooping,
which is used to build forwarding lists for multicast traffic.
Note that only a user with Read/Write access privileges may change the data on this screen.
To access the IGMP Snooping Configuration page, click Switching Multicast IGMP
Snooping Configuration.
To configure IGMP Snooping:
1. Use the Admin Mode Enable/Disable radio button to select the administrative mode for
IGMP Snooping for the switch. The default is disable.
2. Use the Unknown Multicast Filtering Enable/Disable radio button to select the unknown
multicast filtering mode for the switch. The default is disable.
The following table displays information about the global IGMP snooping status and statistics
on the page.
Field Description
Multicast Control Frame Count The number of multicast control frames that are processed by the
CPU.
Interfaces Enabled for IGMP Snooping A list of all the interfaces currently enabled for IGMP Snooping.
Data Frames Forwarded by the CPU The number of data frames forwarded by the CPU.
VLAN Ids Enabled For IGMP Snooping Displays VLAN Ids enabled for IGMP snooping.