Routing
318
ProSafe M5300 Switch
PIM Candidate RP Configuration
To display the IPv6 PIM Candidate RP Configuration page, click Routing IPv6 Multicast
PIM Candidate RP Configuration.
To configure candidate RP settings for IPv6 PIM-SM:
1. Use Interface to select the interface for which data is to be displayed.
2. Use Group Address to specify the group IPv6 address prefix transmitted in
Candidate-RP-Advertisements.
3. Use Prefix Length to specify the group IPv6 Prefix Length transmitted in
Candidate-RP-Advertisements.
4. Click ADD to add a new Candidate RP Address for the PIM-SM router.
5. Click DELETE to delete an extant Candidate RP Address for the PIM-SM router.