Configuring System Information
60
ProSafe M5300 Switch
DHCPv6 Server Configuration
To display the DHCP Server Configuration page, click System > Services > DHCPv6 Server>
DHCP Server Configuration. A screen similar to the following displays.
To configure global DHCPv6 server settings:
1. Use Admin Mode to specify whether the DHCPv6 Service is to be Enabled or Disabled.
Default value is Disable.
2. In the DHCPv6 Server DUID field, view the client identifier used by the DHCPv6 client (if
enabled) when sending messages to the DHCPv6 server..
3. Click CANCEL to cancel the configuration on the screen. Resets the data on the screen to
the latest value of the switch.
4. Click APPLY to send the updated configuration to the switch. Configuration changes take
effect immediately.
DHCPv6 Pool Configuration
Use the DHCPv6 Pool Configuration page to set up a pool of DHCPv6 parameters for
DHCPv6 clients. The pool is identified with a pool name and contains IPv6 addresses and
domain names of DNS servers.
To display the DHCPv6 Pool Configuration page, click System > Services > DHCPv6
Server> DHCPv6 Pool Configuration. After expanding the DNS Server Addresses and
Domain Name fields, a screen similar to the following displays.