Routing
308
ProSafe M5300 Switch
Candidate RP Configuration
The settings on this page are valid for PIM-SM and do not apply if the PIM mode is PIM-DM.
To display the PIM Candidate RP Configuration page, click Routing Multicast PIM-SM
Candidate RP Configuration.
To configure a candidate RP:
1. Use Interface to select the interface for which data is to be displayed.
2. Use Group Address to specify the group address transmitted in
Candidate-RP-Advertisements.
3. Use Group Mask to specify the group address mask transmitted in
Candidate-RP-Advertisements.
4. Click ADD to add a new Candidate RP Address for the PIM-SM router.
5. Click DELETE to delete an extant Candidate RP Address for the PIM-SM router.