Maintenance
495
ProSafe M5300 Switch
File Management
The system maintains two versions of the ProSafe software in permanent storage. One
image is the active image, and the second image is the backup image. The active image is
loaded during subsequent switch restarts. This feature reduces switch down time when
upgrading or downgrading the ProSafe software.
The File Management menu contains links to the following options:
•Copy on page 495
•Dual Image Configuration on page 496

Copy

To display the Copy page, click Maintenance File Management Copy.
1. Use Source Image to select the image1 or image2 as source image when copy occurs.
2. Use Stack member to select the destination unit to which you are going to copy from
master.
3. Use Destination Image to select the image1 or image2 as destination image when copy
occurs.