Managing Device Security
358
ProSafe M5300 Switch
Enable Password Configuration
Use this page to configure a local password to control CLI access to privileged levels.
Passwords are a maximum of 64 alphanumeric characters. The password is case sensitive.
To display the Enable Password Configuration page, click Security Management Security
Enable Password.
To configure the enable password:
1. Use Password to specify a password. Passwords are a maximum of 64 alphanumeric
characters.
2. Use Confirm Password to enter the password again, to confirm that you entered it
correctly.
Line Password Configuration
Use this page to configure a password to control CLI access to the switch by using one of the
following methods:
•Console
•Telnet
•SSH
To display the Line Password Configuration page, click Security Management Security
Line Password.