Configuring Switching Information
175
ProSafe M5300 Switch
MVR Interface Configuration
To display the MVR Interface Configuration page, click Switching > MVR > Advanced > MVR
Interface Configuration. A screen similar to the following displays.
1. Use Interface to specify the interface you want to configure.
2. Use Admin Mode to Enable or Disable MVR on a port. The factory default is Disable.
3. Use Type to configure the port as an MVR receiver port or a source port. The default port
type is none.
4. Use Immediate Leave to Enable or Disable the Immediate Leave feature of MVR on a
port. The factory default is Disable.
5. Click REFRESH to refresh the web page to show the latest MVR interface configuration.
6. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
7. Click APPLY to send the updated configuration to the switch. Configuration changes take
effect immediately.
Field Definition
Status Displays the status of the specific port.