Configuring System Information
111
ProSafe M5300 Switch
ISDP Interface Configuration
To display this page, click System ISDP Advanced Interface Configuration. A screen
similar to the following displays.
To configure per-interface ISDP settings:
1. To configure ISDP settings on one or more interfaces, select the check box associated
with each interface to configure, or select the check box in the heading row to apply the
same settings to all interfaces.
2. Use Admin Mode to enable or disable ISDP on the port. The default value is enable.
3. Click APPLY to update the switch with the changes.
4. Click CANCEL to abandon the changes.
ISDP Neighbor
Use the ISDP Neighbor page to view information about other devices the switch has discovered
through the ISDP.
To display this page, click System ISDP Advanced Neighbor. A screen similar to the
following displays.