Monitoring the System
471
ProSafe M5300 Switch
Console Log ConfigurationThis allows logging to any serial device attached to the host.
To access the Console Log Configuration page, click Monitoring Logs > Console Log
Configuration.
1. A log that is “Disabled” shall not log messages. A log that is “Enabled” shall log
messages. Enable or Disable logging by selecting the corresponding radio button.
2. Severity Filter. A log records messages equal to or above a configured severity threshold.
Select the severity option by selecting the corresponding line on the pull-down entry field.
These severity levels have been enumerated below:
•Emergency (0) - system is unusable
•Alert (1) - action must be taken immediately
•Critical (2) - critical conditions
•Error (3) - error conditions
•Warning (4) - warning conditions
•Notice(5) - normal but significant conditions
•Informational(6) - informational messages
•Debug(7) - debug-level messages
SysLog ConfigurationTo access the SysLog Configuration page, click Monitoring Logs > Sys Log Configuration.