Routing
312
ProSafe M5300 Switch
Admin Boundary Configuration
The definition of an administratively scoped boundary is a mechanism to stop the ingress and
egress of multicast traffic for a given range of multicast addresses on a given routing
interface.
To display the Admin Boundary Configuration page, click Routing Multicast Admin
Boundary Configuration.
To configure an administrative boundary:
1. Use Interface to select the router interface for which the administratively scoped
boundary is to be configured.
2. Use Group IP to enter the multicast group address for the start of the range of addresses to
be excluded. The address must be in the range of 239.0.0.0 through 239.255.255.255.
3. Use Group Mask to enter the mask to be applied to the multicast group address. The
combination of the mask and the Group IP gives the range of administratively scoped
addresses for the selected interface.
4. Click ADD to add a new administratively scoped boundary.
5. Click DELETE to delete the administratively scoped boundary selected.