Managing Device Security
388
ProSafe M5300 Switch
Note: If 802.1X is enabled, authentication is performed by a RADIUS
server. This means the primary authentication method must be
RADIUS. To set the method, go to Security > Management
Security > Authentication List and select RADIUS as method 1 for
defaultList. For more information, see “Authentication List
Configuration” on page 6-366.
•Disable - The switch does not check for 802.1X authentication before allowing traffic
on any ports, even if the ports are configured to allow only authenticated users.
Default value.
2. Use VLAN Assignment Mode to select one of options for VLAN Assignment mode: enable
and disable. The default value is disable.
3. Use Users to select the user name that will use the selected login list for 802.1x port
security.
4. Use Login to select the login to apply to the specified user. All configured logins are
displayed.
Field Description
Authentication List Displays the authentication list which is used by 802.1X.