
Nighthawk AC1900 Smart WiFi Router
Table 1. LED and button descriptions (continued)
LED | Description |
|
|
Ethernet ports | The LED color indicates the speed: white for Gigabit Ethernet connections and amber for 100 |
Mbps or 10 Mbps Ethernet connections. | |
| • Solid. A |
| • Blinking. The port is sending or receiving traffic. |
| • Off. No device is connected to this Ethernet port. |
WiFi On/Off | Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on and off. |
button with LED | If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned off and you |
| cannot use WiFi to connect to the router. |
|
|
WPS button with | This button lets you use WPS to join the WiFi network without typing the WiFi password. The |
LED | WPS LED blinks white during this process and then lights solid white. |
|
|
You can disable LED blinking or turn off all LEDs except the Power LED. For information about how to do this, see Disable LED Blinking or Turn off LEDs on page 96.
Rear Panel
The rear panel has the connections and buttons shown in the following figure.
Reset | Ethernet |
|
| USB 2.0 | Power | Power |
Internet | ||||||
button | LAN ports | port | port | On/Off | connector |
Figure 3. Router rear panel
Pressing the Reset button restores the factory settings. See Factory Settings on page 166.
Hardware Setup
11