Factory Settings, Factory default settings | NETGEAR Model R7000

Nighthawk AC1900 Smart WiFi Router

Factory Settings

You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the router for at least seven seconds. The router resets, and returns to the factory configuration settings shown in the following table.

Table 3. Factory default settings

	Feature		Default behavior

	Router login	User login URL	www.routerlogin.com or www.routerlogin.net

		User name (case-sensitive)	admin

		Login password (case-sensitive)	password

	Internet	WAN MAC address	Use default hardware address
	connection
	connection	WAN MTU size	1500
		WAN MTU size	1500

		Port speed	AutoSensing

	Local network	LAN IP	192.168.1.1
	(LAN)
	(LAN)	Subnet mask	255.255.255.0
		Subnet mask	255.255.255.0

		DHCP server	Enabled

		DHCP range	192.168.1.2 to 192.168.1.254

		Time zone	Pacific time

		DHCP starting IP address	192.168.1.2

		DHCP ending IP address	192.168.1.254

		DMZ	Disabled

		Time zone	GMT for WW except NA and GR, GMT+1 for GR, GMT-8
			for NA

		Time zone adjusted for daylight	Disabled
		savings time

		SNMP	Disabled

	Firewall	Inbound (communications coming	Disabled (except traffic on port 80, the HTTP port)
		in from the Internet)

		Outbound (communications going	Enabled (all)
		out to the Internet)

		Source MAC filtering	Disabled

Supplemental Information

166

Image 166

NETGEAR Model R7000 user manual Factory Settings, Factory default settings

Contents

Nighthawk AC1900 Smart WiFi Router Trademarks SupportCompliance Contents Control Access to the Internet Use the Router as a Media Server Manage Your Network Appendix a Supplemental Information Hardware Setup Attach the Antennas Unpack Your Router To attach the antennas Top and Front Panels USB 3.0 port Rear Panel Router rear panel Position Your Router  To position your router Cable Your Router  To cable your router Connect to the Network Access the Router  To use WPS to connect to the WiFi network Wired ConnectionWiFi Connection  To find and select the WiFi network Netgear genie Automatic Internet Setup Types of LoginsUse an Internet Browser to Access the Router Label  To use Netgear genie to set up your router  To log in to the router Change the LanguageLog In to the Router  To change the language Access the Router with Netgear genie Apps  To use the genie app to access the router Specify Your Internet Settings  To use the Setup Wizard Use the Internet Setup WizardSelect Advanced Setup Wizard Specify Your Internet Settings Specify an Internet Connection Without a Login Manually Set Up the Internet Connection To specify the Internet connection settings Specify an Internet Connection That Uses a Login  To view or change the basic Internet setup Select Internet Select Advanced Advanced Setup IPv6  To set up an IPv6 Internet connectionSpecify IPv6 Internet Connections IPv6 Auto Detect Requirements for Entering IPv6 AddressesInternet Connection Type list, select Auto Detect IPv6 Auto Config Specify Your Internet Settings IPv6 6to4 Tunnel IPv6 Pass Through  To set up a pass-through IPv6 Internet connectionInternet Connection Type list, select Pass Through  To set up a fixed IPv6 Internet connection IPv6 Fixed IPv6 Dhcp  To set up an IPv6 Internet connection with a Dhcp serverInternet Connection Type list, select Dhcp Specify Your Internet Settings  To set up a PPPoE IPv6 Internet connection IPv6 PPPoE Change the MTU Size Select Advanced Setup WAN Setup  To change the MTU size Common MTU sizes Optimize Performance Prioritize Internet Traffic with Quality of Service Optimize Internet Gaming with Upstream QoS  To enable upstream QoS Add Upstream QoS Rules Select Advanced Setup QoS Setup Upstream QoS Set Up QoS for Applications and Online Gaming To create a QoS policy for applications and online games Set Up QoS for a Router LAN Port Set Up QoS for a MAC Address From the Priority Category list, select Ethernet LAN Port From the Priority Category list, select MAC Address Edit an Upstream QoS Policy To edit a QoS policy Delete an Upstream QoS Policy Optimize Video Streaming with Downstream QoS To delete a QoS policy  To enable downstream QoS Add a Downstream QoS Rule by Device Add Downstream QoS Rules by Keyword To add a downstream QoS rule by keyword  To enable Universal Plug and Play Improve Network Connections with Universal Plug and Play Wi-Fi Multimedia Quality of Service  To disable WMM QoS Control Access to the Internet  To set up Live Parental Controls Set Up Parental ControlsSelect Parental Controls Control Access to the Internet  To set up access control Block Access to Your NetworkClick the Take me to the status screen button Use Keywords to Block Internet Sites  To set block Internet sites Click the Add Keyword button Select Advanced Security Block Sites To delete keywords from the list  To block services Block Services from the InternetSelect Advanced Security Block Services  To schedule blocking Schedule When to Block Internet Sites and ServicesSelect Advanced Security Schedule Avoid Blocking on a Trusted Computer Set Up Security Event Email Notifications To set up email notifications  To specify a trusted computer Control Access to the Internet Router USB Drive Requirements Access a USB Drive on the Network To connect a USB drive  To map the USB device to a Windows network drive Launch readyshareconnect.exe Back Up Mac Computers with Time Machine Set Up a USB Hard Drive on a MacBack Up Windows Computers with ReadySHARE Vault  To back up your Windows computer Prepare to Back Up a Large Amount of Data Use Time Machine to Back Up onto a USB Hard Drive Control Access to the USB Drive  To specify the USB access settings Select Advanced USB Storage Advanced Settings Network Neighborhood/MacShare. Enabled by default View Network Folders on a USB Drive  To set up FTP accessUse FTP Within the Network  To view network folders Select Advanced USB Storage Advanced Settings Select Advanced ReadySHARE Add a Network Folder on a USB Drive To add a network folder Click the Create Network Folder button  To edit a network folder Edit a Network Folder on a USB DriveApprove USB Devices  To approve USB devices Click the Approved Devices button Select Advanced Advanced Setup USB SettingsSafely Remove a USB Drive Select the Allow only approved devices check box Select USB Storage Basic Settings Access the Router’s USB Drive Through the Internet Set Up FTP Access Through the Internet Access the USB Drive Through the Internet To access the USB drive from a remote computer Access the USB Drive Through the Internet with FTP  To access the USB drive with FTP from a remote computer Dynamic DNS Your Personal FTP Server Set Up a New Dynamic DNS Account  To set up Dynamic DNS if you already have an account Specify a DNS Account That You Already Have Netgear  To change your settings Set Up Your Personal FTP ServerChange the Dynamic DNS Settings Select Advanced Advanced Settings Dynamic DNS Use the Router as a Media Server Play Music from a USB Drive with iTunes Server Specify ReadyDLNA Media Server Settings To specify media server settings Select Advanced USB Storage Media Server  To specify iTunes server settings Play music on a USB drive with iTunes  To set up the router to work with TiVo Play Media from a USB Drive on TiVo  To play videos On the TiVo, select TiVo Central My Shows  To copy TiVo files to a computer Share a USB Printer Download the ReadySHARE Printer Utility Install the Printer Driver and Cable the Printer To install the driver and cable the printer  To download the utility Install the ReadySHARE Printer Utility  To install the utility Use the Shared Printer  To manually connect and print View or Change the Status of a Printer  To view or change the status Use the Scan Feature of a Multifunction USB Printer  To use the scan feature of a multifunction USB printer  To change the language Select Tools Configuration Change Netgear USB Control Center Settings To specify the time-out Select Tools Configuration Specify Network Settings  To disable LED blinking or turn off the LEDs Disable LED Blinking or Turn off LEDsView WAN Settings Select Advanced Advanced Setup LED Control Settings Select Advanced Setup WAN Setup Set Up a Default DMZ Server  To set up a default DMZ server Change the LAN TCP/IP Settings Change the Router’s Device Name RIP Version list, select one of the following Specify the IP Addresses that the Router Assigns Disable the Dhcp Server Feature in the Router  To disable the Dhcp server feature in the router  To edit a reserved address entry Reserve LAN IP Addresses To reserve an IP address  To delete a reserved address entry  To use the WPS Wizard Use the WPS Wizard for WiFi ConnectionsSpecify Basic WiFi Settings Select Advanced WPS Wizard  To specify basic wireless settings Change the WiFi Security Option  To change the WPA settings Set Up a Guest Network  To set up a guest network Select Guest Network Airtime Fairness How the Router Manages Wireless ClientsImplicit Beamforming Enable or Disable the Wireless Radios Control the Wireless RadiosUse the WiFi On/Off Button  To enable or disable the wireless radios Set Up a Wireless Schedule  To set up the wireless schedule Specify WPS Settings  To specify WPS Settings Use the Router as a Wireless Access Point  To set up the router as an AP Select Advanced Advanced Setup Wireless AP Set Up the Router in Bridge Mode  To set up bridge mode Click the setup bridge mode wireless settings button Set Up a Wireless Distribution System Wireless repeating scenario Set Up the Base Station  To set up the base station Set Up a Repeater  To configure a Netgear router as a repeater Specify Network Settings 120 Specify Network Settings 121 Manage Your Network  To check for new firmware and update your router Update the Router FirmwareChange the admin Password Select Advanced Administration Router Update Select Advanced Administration Set Password Recover the admin Password To set the password for the user name admin  To set up password recovery View Router Status  To recover your password To view router status and usage information Click the Advanced tab Display Internet Port Statistics To display Internet port statistics Check the Internet Connection Status  To check the Internet connection status View Logs of Router Activity  To view logs Monitor Internet Traffic Select Advanced Administration Logs To monitor Internet traffic Select Advanced Advanced Setup Traffic Meter  To set up a static route Create Custom Static Routes Select Advanced Advanced Setup Static Routes  To edit a static route  To view devices on the network View Devices Currently on the Network To delete a static route Select Attached Devices Back Up Settings Manage the Router Configuration FileRestore Configuration Settings  To erase the configuration settings Erase the Current Configuration SettingsDo not interrupt the reboot process Remote Management  To set up remote management  To use remote access Use VPN to Access Your Network Set Up a VPN Connection  To specify the VPN service Specify VPN Service in the RouterInstall OpenVPN Software on Your Computer Select Advanced Advanced Setup VPN Service Use VPN to Access Your Network 141 Use a VPN Tunnel  To open a VPN tunnel Set Up VPN Client Internet Access in the Router Use VPN to Access the Router’s USB Drive and MediaUse VPN to Access Your Internet Service at Home  To allow VPN clients to use your home Internet service Block VPN Client Internet Access in the Router  To allow VPN clients to access only your home network Use a VPN Tunnel to Access Your Internet Service at Home  To access your Internet service Specify Internet Port Settings Set Up Port Forwarding to a Local Server  To forward specific incoming protocols  To add a custom service Add a Custom Port Forwarding ServiceClick the Add Custom Service button Edit a Port Forwarding Service  To edit a port forwarding entry How the Router Implements the Port Forwarding Rule Delete a Port Forwarding EntryApplication Example Make a Local Web Server Public  To delete a port forwarding entry Add a Port Triggering Service Set Up Port Triggering To add a port triggering service Enable Port Triggering  To enable port triggering Clear the Disable Port Triggering check box Application Example Port Triggering for Internet Relay Chat Specify Internet Port Settings 155 Troubleshooting Quick Tips Wireless SettingsNetwork Settings Sequence to Restart Your Network Power LED Stays Amber Standard LED Behavior When the Router is Powered OnPower LED Is Off or Blinking Troubleshoot with the LEDs LEDs Never Turn Off WiFi LED Is OffCannot Log In to the Router Internet or Ethernet Port LEDs Are Off Cannot Access the Internet Troubleshoot PPPoE Changes Not Saved Wireless ConnectivityTroubleshoot Internet Browsing Test the LAN Path to Your Router Troubleshoot Your Network Using the Ping Utility To ping the router from a Windows computer Test the Path from Your Computer to a Remote Device Supplemental Information Factory Settings Factory default settings Supplemental Information 167 Technical Specifications R7000 Router specifications