Nighthawk AC1900 Smart WiFi Router
Top and Front Panels
The router has status LEDs on top and a USB 3.0 port on the front.
USB 3.0 port
Figure 2. Router top and front view
Table 1. LED and button descriptions
LED | Description |
|
|
Power | • Solid amber. The router is starting. |
| • Blinking amber. The firmware is upgrading, or the Reset button was pressed. |
| • Solid white. The router is ready. |
| • Blinking white. The firmware is corrupted. |
| • Off. Power is not supplied to the router. |
|
|
Internet | • Solid white. The Internet connection is ready. |
| • Solid amber. The router has detected an Ethernet cable connection to the modem. |
| • Off. No Ethernet cable is connected between the router and the modem. |
|
|
2.4 GHz | • Solid white. The 2.4 GHz WiFi radio is operating. |
Wireless | • Blinking. The router is sending or receiving WiFi traffic. |
| |
| • Off. The 2.4 GHz WiFi radio is off. |
|
|
5 GHz Wireless | • Solid white. The 5 GHz WiFi radio is operating. |
| • Blinking. The router is sending or receiving WiFi traffic. |
| • Off. The 5 GHz WiFi radio is off. |
|
|
USB (1 and 2) | The USB 1 LED is for the USB 3.0 USB port on the front panel. The USB 2 LED is for the USB |
| 2.0 port on the rear panel. |
| • Solid white. A USB device is connected and is ready. |
| • Blinking. A USB device is plugged in and is trying to connect. |
| • Off. No USB device is connected or someone clicked the Safely Remove Hardware |
| button, and it is now safe to remove the attached USB device. |
|
|
Hardware Setup
10