NETGEAR Model R7000 user manual b. In the RIP Version list, select one of the following

Nighthawk AC1900 Smart WiFi Router

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home screen displays.

4.Select ADVANCED > Setup > LAN Setup.

5.In the IP Address field, type the IP address.

6.In the IP Subnet Mask, type the subnet mask of the router.

The IP address and subnet mask identifies which addresses are local to a specific device and which must be reached through a gateway or router.

7.Change the RIP settings.

Router Information Protocol (RIP) allows a router to exchange routing information with other routers.

a.In the RIP Direction list, select one of the following:

-Both. The router broadcasts its routing table periodically and incorporates information that it receives.

-Out Only. The router broadcasts its routing table periodically.

-In Only. The router incorporates the RIP information that it receives.

b.In the RIP Version list, select one of the following:

-Disabled. This is the default setting.

-RIP-1. This format is universally supported. It is adequate for most networks, unless you have an unusual network setup.

-RIP-2. This format carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M uses multicasting.

8.Click the Apply button. Your changes are saved.

Specify Network Settings

100