NETGEAR JNR1010V2, JWNR2000v5, JWNR2010v5, WNR2010, WNR2020, WNR614, WNR618 Technical Specifications

Supplemental Information

77

N150 and N300 Wireless Routers

Technical Specifications

Table 5. Router specifications

Feature Description

Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, and

SMB

Power adapter • North America: 120V, 60 Hz, input

• UK, Australia: 240V, 50 Hz, input

• Europe: 230V, 50 Hz, input

• All regions (output): 12 VDC @ 1A, output

Dimensions 217.74 x 147.73 x 34.92 mm (8.57 x 5.81 x 1.37 in.)

Weight 0.41 kg (0.91 lb)

Operating temperature 0° to 40°C (32º to 104ºF)

Operating humidity 90% maximum relative humidity, noncondensing

Electromagnetic emissions FCC Part 15 Class B

VCCI Class B

EN 55 022 (CISPR 22), Class B C-Tick N10947

LAN 10BASE-T or 100BASE-Tx, RJ-45

WAN 10BASE-T or 100BASE-Tx, RJ-45

Wireless Maximum wireless signal rate complies with the IEEE 802.11 standard. See the

entry for Transmission speed in Table 4 on page 76.

Radio data rates Auto Rate Sensing

Data encoding standards IEEE 802.11n version 2.0

IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHz

Maximum computers per

wireless network Limited by the amount of wireless network traffic generated by each node

(typically 50–70 nodes)

Operating frequency range 2.412–2.462 GHz (US)

2.412–2.472 GHz (Japan)

2.412–2.472 GHz (Europe ETSI)

802.11 security WEP, WPA-PSK, WPA2-PSK, WPA-PSK + WPA2-PSK mixed mode,

WPA/WPA2 Enterprise

Wireless

(continued) 20/40 MHz coexistence Enabled

Data rate Best

Output power Full

Table 4. Router factory default settings (continued)

Feature Default Behavior

Contents

Main N150 and N300 Wireless Routers User Manual Models: Page Contents Chapter 1 Hardware Setup Chapter 2 Connect to the Network and Access the Router Chapter 3 Specify Your Internet Settings Chapter 4 Networking Chapter 5 Manage Your Network Chapter 6 Troubleshooting Page Page Hardware Setup N150 and N300 Wireless Routers Hardware Features Front Panel LEDs The router front panel has the following status LEDs. Table 1. Front panel LED descriptions Back Panel Position Your Router Cable Your Router Verify the Cabling Page Connect to the Network Wired Connection WiFi Connection Types of Logins Use a Web Browser to Access the Router NETGEAR genie Automatic Internet Setup Log In to the Router Page Page Use the Internet Setup Wizard Manually Set Up the Internet Connection Specify an Internet Connection Without a Login Specify an Internet Connection That Uses a Login Page Change the MTU Size Page Page Page View or Change WAN Settings Set Up a Default DMZ Server Change the Routers Device Name Change the LAN TCP/IP Settings Page Specify the IP Addresses that the Router Assigns Disable the DHCP Server Feature in the Router Reserve LAN IP Addresses Page Use the WPS Wizard for WiFi Connections Specify Basic WiFi Settings Page Change the WiFi Security Option Set Up a Guest Network Control the Wireless Radio Enable or Disable the Wireless Radio Set Up a Wireless Schedule Set up a Wireless Access List Page Specify WPS Settings Wireless Distribution System Set Up the Base Station Set Up a Repeater Page Static Routes Page View Devices Currently on the Network Improve Network Connections with Universal Plug and Play Page Page Update the Router Firmware Change the admin Password Recover the admin Password Page View Router Status View the Internet Connection Settings Display Internet Port Statistics View the Internet Connection Status DHCP Connection PPPoE Connection PPTP Connection View Wireless Settings View Guest Network Settings Reboot the Router Manage the Configuration File Back Up Settings Restore Configuration Settings Erase Configuration Settings Page Forgotten Passwords admin Password WiFi Passwords WiFi Connections Changes Not Saved Troubleshoot with the LEDs Apply Power to the Router and Check the LEDs All LEDs Remain Lit Power LED Is Off or Blinking Power LED Stays Amber Internet LEDs Is Off WiFi LED Is Off Cannot Log In to the Router The Router Cannot Access the Internet Troubleshoot Internet Browsing Troubleshoot a PPPoE Internet Connection Troubleshoot Your Network Using the Ping Utility Test the LAN Path to Your Router Test the Path from Your Computer to a Remote Device Troubleshoot IP Addresses Page Supplemental Information N150 and N300 Wireless Routers Factory Settings Table 4. Router factory default settings Supplemental Information N150 and N300 Wireless Routers Technical Specifications Table 5. Router specifications Table 4. Router factory default settings (continued)