Nikon 2202 user manual Optional RT‑1 Tripod Collar Ring, Attaching the Tripod Collar Ring

■The Optional RT‑1 Tripod Collar Ring

Loosen the tripod collar ring attachment knob to rotate the camera to the desired position and orient the display horizontally or vertically. Note that your hand may come into contact with the tripod if you rotate the camera En while holding it by the handgrip. Depending on how the camera or

tripod is attached, camera shake may be reduced by attaching the tripod to the camera tripod mount.

AWARNING

Fully tighten the tripod collar ring attachment knob when attaching tripod collar ring. Failure to observe this precaution could result in the tripod collar ring becoming detached from the lens, causing injury.

Attaching the Tripod Collar Ring

zLoosen the tripod collar ring attachment knob

(q).

xOpen the ring.

Pull the attachment knob toward you (w) and open the ring (e).

cPlace the lens in the ring (r).

6 v Close the ring.

	Pull the attachment knob toward you (t) and close
4	the ring (y). Do not use excessive force, as your
	hand could be caught in the ring.

7 5 b Tighten the attachment knob (u).

Positioning the Camera

Loosen the attachment knob (q), adjust the position indices to the desired vertical or horizontal orientation (w), and then tighten the attachment knob (e).

Removing the Tripod Collar Ring

4	z	Loosen the attachment knob (q).
	x	Remove the ring.

Pulling the attachment knob toward you (w), open (e) and remove the lens (r).

19