VI Basic Operations | NETWORK |
|
|
|
|
4Using the
4.6.2Setting External Servers of the DS-L1—Network Settings
Consult the network administrator in your organization for details on the FTP server.
If you are going to connect the
Setting the FTP client function
To set the FTP client function of the
Enables/disables network operation.
Sets the IP address of the
Enable FTP Client
For image files to be sent to the FTP server, always select this check box to enable the FTP client function.
External Server
Set the IP address and the gateway address of the server PC. (Before images can be sent to any FTP server that belongs to a different network group, you must enter the gateway settings.)
Server No. | Five servers can be stored in memory. Assign each server a number. | |||||||
IP Address |
|
|
|
|
|
|
| ←Input example |
192 |
| 168 |
| 010 |
| 001 | ||
User ID | Enter a user ID that is needed to log in to the server. | |||||||
Pass Word | Enter a password that is needed to log in to the server, as necessary. | |||||||
Gate Way |
|
|
|
| ←Input example | |||
192 |
| 168 |
| 128 |
| 001 |
If any entry in the IP address consists of two digits or one digit, add “0” or “00” at the beginning of it to make each entry consist of three digits as you enter.
Click the input box and enter an address value. If you missed entering any address value, hold down skip on the screen keyboard while you skip to the last entry of the address, then enter the correct value again.
When you finished setting all, press SAVE to save what you’ve set.
The server with the number you last saved is selected when the
- 105 -