VI Basic Operations | NETWORK |
|
|
|
|
4 Using the |
|
|
Saving an image
To save an image to the FTP server from the REC menu, follow the procedure described below.
1)Choose “1shot” if you want to save only one sheet image. Choose “Continue” to save multiple sheets of images at given intervals.
2)Change the destination or file name to or in which to save, as necessary. If you want to save a log, enter a comment in LOG.
3) | Press | FTP | , and the image will be saved to the FTP server. If you did not change the |
| destination in step 2, the image will be saved using the same folder name, file name, file | ||
| format, and compression rate that were set in File Settings. Refer to File Settings (“1.4.2 | ||
| Image File Settings” in Chapter VI) for details on the format of the saved image. Also, | ||
| refer to the preceding sections for details about the recommended examples for file names, | ||
| etc. |
Interval photography
Interval photographing refers to photographing an image successively at specified time intervals. To perform interval photographing, follow the procedure described below. We recommended selecting Auto for the file name in File Settings, so that files will be named after the photographed date and time.
1) | Press | 1shot | to change to | Continue | . The Cnt. and Int. icons will be displayed. |
2)In Cnt, set the number of frames to be photographed. Up to 500 frames can be set. If “Endless” is selected in Cnt. as the number of frames, an image will be photographed successively.
3)In Int., set a photography interval time. It can be set anywhere from 10 seconds to 6 hours. Choose the desired interval time from the following:
10s /15s /20s/30s /45s / 60s / 1m30s / 2m / 3m / 4m/ 5m / 6m / 10m / 15m / 20m / 30m / 45m / 60m / 1h30m / 2h / 3h / 4h / 5h / 6h
4) | Press | FTP | , and interval photography will start, with images saved to the FTP server. |
5)Press Stop to stop photography in the middle.
Depending on the length of time required for network transfers, the
If images cannot be saved at specified intervals.
During normal operation
VPhotographing V Photographing V Photographing
Int. set value | Int. set value | Int. set value | ||||
| ||||||
When set intervals cannot be maintained |
|
|
| |||
V Photographing |
|
| V Photographing |
| ||
Int. set value | Int. set value | Int. set value | ||||
We recommend selecting Auto for the file name in File Settings, so that files will be named after the photographed date and time.
- 109 -