VI Basic Operations | MICROSCOPE |
|
|
|
|
6Using the Microscope Control
6.2.1Microscope Control Menu 1
Select the tab [1] of the microscope control menu to display "microscope control menu 1." In "microscope control menu 1," you can control the motorized units of the microscope used often. Here, the menus displayed on
Keep in mind that if any of these parts do not exist or manual parts are attached, menus for these parts will not be displayed.
Menu configuration (when the microscope connected has all motorized parts attached)
Select this check box when you want to connect
the camera head to the front port of the DIH.
Focus
Coarse/fine selector (Fine motion/ Coarse motion)
Escape (The stage descends for specimen replacement.)
Autofocus
Objective
Shows magnification and NA value.
Shows detail information.
/・・・/ Selects the objective to use.
Optical zoom
Changes the zoom magnification of the rear port of the DIH.
Optical path
(Binocular)/ (Front port)/
(Rear port) Changes and shows optical path.
(Closed)/ (Open) Opens or closes the shutter.
Filter
Shows filter cube name.
/・・・/ Selects the filter cube to use.
Turns the lamp on or off.
Sets a preset voltage (9 V).
Adjusts the lamp voltage.
Info box for information display (Shows the operating status or detail items of the icon whose operation is selected.)
- 131 -