IV Connecting and Installing the Equipment
3 Connection Methods
3Connection Methods
(1)Connecting the DS Camera Head DS-5M (Equivalent to that for DS-5Mc)
Be sure to turn off the power for the
Connect one end of the camera cable supplied with the unit to the CAMERA connector on the
1)Remove the C mount cap from the C mount on the camera head.
2)Make sure there is no dust on the C mount adapter.
If there is, use an air blower or similar means to remove it.
3)Screw the C mount adapter into the C mount on the camera head.
Screw it in as far as it will go.
4)Insert the C mount adapter into the vertical tube of the microscope.
Use the clamping screw on the vertical tube to secure the C mount adapter in place.
You can also attach a x0.7 relay lens.
When you have mounted the camera head on a microscope, be sure to read "Chapter V Microscope Adjustment" as well.
To CAMERA connector on the
C mount
C mount adapter
Vertical tube of microscope
Select a mountable lens (see "Chapter II Peripheral Equipment"), then screw it into the C mount. Note that the image quality produced by this product is tuned for microphotography. The tripod mount on the camera head can also be used to mount the camera head on a tripod.
(2) Connecting an External Display
Be sure to turn off the power for the
- 12 -