.NETWORK.

VI Basic Operations

 

 

 

4Using the DS-L1 via a Network

4.2.2Setting Essential Items—Network Settings

In this instruction manual, explanation are given assuming that the IP address of the DS-L1 is 192.168.10.2, that of the server is 192.168.10.1, and that of the subnet mask is 255.255.0.0., while the gateway address is 192.168.128.1.

Of course, you should use the IP address assigned to you by your network administrator.

We must assume that network settings on the PC side (LAN connection) are complete.

Please consult your network administrator for details.

Network settings of the DS-L1

If you are going to connect the DS-L1 to a LAN, you need to enable it for network operation and set its own address.

To make network settings on the DS-L1, select Network Settings from the SETUP menu to call up the Network Settings screen shown below.

Enables/disables network operation.

Sets the IP address of the

DS-L1.

Enable Network

To use a network, always select this check box.

Read Only (FTP, WEB : disable Write/Control)

This is to disable writing to the internal files of the DS-L1 when it is operated using a WEB browser or FTP command. When this check box is selected, you cannot write to the internal files.

Deselect this check box if you want to control the DS-L1 from the PC or use a WEB marker via a network.

If you only want to get images from the DS-L1, leave this check box selected.

- 82 -