| .TOOL. | VI Basic Operations |
|
|
|
3Measuring
8)“Center Cross” is an option that allows you to fill the center part of the crosshairs. Select the “Yes” check box to fill the center part of the crosshairs. If you select the “No” check box, the center part of the crosshairs will not be filled.
9) | Press |
| Center |
| to move the center position of the crosshairs back to the center of the | |||
| screen. |
|
|
|
|
|
| |
|
|
|
|
|
|
| ||
10) | Press |
| Save |
| to save the crosshairs settings. The display position, size and color, and | |||
| display mode you’ve set in 2) to 8) above are saved to internal memory. | |||||||
|
|
|
|
| ||||
| NOTE: | Crosshairs settings once saved remain unchanged until you execute |
|
| ||||
| Save |
| ||||||
|
|
| again. |
|
|
|
|
When you display crosshairs for the first time after starting the
11)Press to return to the menu in which you previously were.
12)To hide the displayed crosshairs, press Cross again.
Normally, crosshairs are displayed on the screen only and is not drawn on saved or printed images. By leaving the “Cross” check box selected on REC menu, you can draw crosshairs on saved or printed images.
NOTE:
*If while crosshairs are on you create or display a superimposed image, the crosshairs will be hidden. The crosshairs can be redisplayed after you have finished creating or displaying a superimposed image.
*Photographed images whose image size is 2,560 x 1,920 cannot be saved or printed with crosshairs written over the image. If 2,560 x 1,920 is selected for the image size, it will be automatically reduced to 1,280 x 960.
Crosshairs display atThe
1)Setting from the SETUP menu
Select “ON” for Crosshairs in PowerOn Settings on the SETUP menu and press SAVE .
2)Using Telnet commands from a PC
w_CRSON1 | Displays crosshairs at |
w_CRSON2 | Displays a |
w_CRSOF | Deselects display of crosshairs at |
w_CRSCOL “color code” | Allows you to change the initial color of crosshairs. |
| RD: red, BL: blue, GN: green, PK: pink, WT: white, |
| BK: black, YL: yellow |
For information on Telnet commands, refer to “4.5 Using Telnet Commands for the
NOTE:
*The display position and display mode of crosshairs cannot be set using Telnet commands.
*Even if you’ve set the
- 74 -