| .MICROSCOPE. |
| VI Basic Operations |
|
|
| |
| 6 | Using the Microscope Control |
NOTE:
*When you change the objective, the diascopic illumination aperture diaphragm, diascopic illumination field diaphragm, condenser, Focus and ND filter also are changed accordingly. For more information, refer to the instruction manual for your microscope.
*When you change the objective, all the overlay data, excluding the XY scale and the scale currently displayed, is deleted. For detailed information about the overlay data, refer to the description of the "TOOL" menu.
*When you change the objective, the XY scale and the scale currently displayed also are changed.
Optical zoom <Changes optical zooms>Compatible only with microscope incorporating the
1) Connect the camera head to the rear port of the DIH.
2) Confirm that the check boxthat will be selected (marked by a check mark) when the camera head is connected to the front port of the DIH is unselected now.
3) If you want to reduce the magnification of the optical zoom below its current
magnification, select the icon in the optical zoom column . Conversely, if you
want to increase the magnification, select the icon, to change the magnification.
NOTE:
*For the microscopes incorporating the
*The magnification changes in increments of x0.1, and can be changed in the range x0.8 to x2.0.
*The current magnification is displayed on the "microscope status display/microscopy setup menu" (MIC Info menu).
*When you change the optical zoom, the episcopic illumination field diaphragm is also changed accordingly. For more information, refer to the instruction manual for your microscope.
*When you change the optical zoom, the overlay data, excluding the XY scale and the scale currently displayed, is deleted. For detailed information about the overlay data, refer to the description of the "TOOL" menu.
*When you change the optical zoom, the XY scale and the scale currently displayed also are changed.
/ / Optical path change <Changes optical paths>Compatible only with microscope incorporating the
1) Select the optical path change icon to change optical paths.
2) The current status of the optical path is indicated by a picture depicting the optical path change icon.
(for Binocular, for Front port, for Rear port)
- 134 -