.MICROSCOPE.

VI Basic Operations

 

 

 

 

 

6 Using the Microscope Control

Filter <Shows filter name>

Compatible only with microscopes incorporating the DIH.

1） The menu indicates the name of the current filter in the filter column .

NOTE:

*Before using this function, you must set up filter information from a PC with the setup software. For more information, refer to the instruction manual for your microscope.

*Use microscope control menu 1 to change filters.

Observation method <Sets the observation method>

If the microscope connected is a Nikon 90i microscope incorporating the DIH-E, you can use one of the Nikon-specified default observation methods.

1） Select the icon representing your desired observation method to change microscope settings for this observation method.

2） The icon representing the current observation method will be marked with a red border.

NOTE:

*The default observation method on startup is "BF."

*Right-click on any icon representing an observation method to display the names of all observation methods. You also can select the desired observation method from within this display to change observation methods.

<To set the microscope for user setup microscopy>

Before using a specific observation method, you must register it in the microscope. To register the setting, use the appropriate software installed on the PC connected to your microscope. For more information on registering, refer to the user's manual for the application. If the names of observation methods are also registered along with their settings, moving the cursor to one of the icons representing those numbers will display the name of the observation method under the cursor in the Info box.

- 142 -