VIII Troubleshooting

6 USB

•When connected to a PC, DS-L1 is recognized not as a storage unit but as some other device, such as a camera.

Unable to print with a PictBridge-supporting printer.

•The printing icon for

PictBridge, , does not show.

•Unable to click the printing icon.

•A [PRINTER ERROR!] message is displayed during printing.

•There may be a possibility that PictBridge-supporting printer is selected in Additional Settings screen in the SETUP menu. Select the selection mode for Mitsubishi DP900D printer, using "1.4.5 Settings for Direct Print" as a reference.

•Confirm that PictBridge-supporting printer is selected in the Additional Settings screen in the SETUP menu.

•Confirm that a PictBridge-supporting printer is connected to the USB-D connector on DS-L1.

•Confirm that the power for the PictBridge-supporting printer is turned on. In the case that it is still unable to click the printing icon even though the power is turned on, close the menu, turn on and off the power once more, then display the menu again.

•Check the paper and ink supplies as well as other conditions required for normal printing. Restore the printer to the normal status by referring to the manuals for the printer you are using, and then display the menu to perform the printing.

- 156 -