VI Basic Operations

SETUP

 

 

 

 

1 Preparations Before Photographing

 

 

SXGA/XGA,LCD

 

 

 

Select a monitor output state from those listed below.

 

 

XGA (LCD ON) LCD Color:

Internal monitor is ON, and external monitor XGA output is

 

 

ON. (Color adjustment for the internal LCD monitor)

 

 

SXGA (LCD OFF):

Internal monitor is OFF, and external monitor SXGA output

 

 

is ON. (Color adjustment for the external LCD monitor)

 

XGA (LCD OFF):

Internal monitor is OFF, and external monitor XGA output is

 

 

ON. (Color adjustment for an external LCD monitor)

 

 

XGA (LCD ON):

Internal monitor is ON, and external monitor XGA output is

 

 

ON. (Color adjustment for an external LCD monitor)

 

 

LCD Back Light

Adjust the brightness of the internal monitor.

Display(VGA, LCD) Color Adjustment

Adjust the color balance of the internal monitor.

Use R_GAIN, G_GAIN and B_GAIN to adjust each of the R, G, and B colors.

The color balance of external monitor output also changes when you adjust the color balance of the internal monitor.

Mirror Normal/H/V/HV

You can flip the image horizontally or vertically or rotate the image 180 degrees. Set this function according to the orientation of the camera when attached to a microscope.

1.4.4Adjusting Monitor Output for an External Monitor

If the DS-L1 is connected to an external monitor, you must adjust the monitor output on the Power On Settings screen.

Monitor output is initially set to 1,024 ⋅ 768-resolution, 60-Hz XGA. If observation with a higher-definition display is required when photographing an image, we recommend using 1,280 ⋅ 1,024-resolution, 60-Hz SXGA output.

NOTE: If you select SXGA output, images cannot be displayed on the DS-L1's internal display.

If an external monitor is connected to the DS-L1, adjust its output by the procedure described below.

1)Connect an external monitor to the DS-L1. Refer to “Chapter IV Connecting and Installing the Equipment” for details.

2)Display a menu and select the [SETUP] tag on it to enter the SETUP menu. Select

Power On Settings from the SETUP menu to go to the Power On Settings screen.

3)Press SXGA/XGA, LCD. With each press, the available choices will cycle in the sequence XGA (LCD ON) LCD Color → SXGA (LCD OFF) → XGA (LCD OFF) → XGA (LCD ON).

•XGA (LCD ON) LCD Color: Internal monitor is ON, and external monitor XGA output is ON. (Color adjustment for the internal LCD monitor)

•SXGA (LCD OFF): Internal monitor is OFF, and external monitor SXGA output is ON. (Color adjustment for the external LCD monitor)

•XGA (LCD OFF): Internal monitor is OFF, and external monitor XGA output is ON. (Color adjustment for an external LCD monitor)

•XGA (LCD ON): Internal monitor is ON, and external monitor XGA output is ON. (Color adjustment for an external LCD monitor)

- 33 -