Connecting the Camera to a Printer (Direct Print)

BNotes on Power Source

•When connecting the camera to a printer, use a fully charged battery to prevent the camera from turning off unexpectedly.

•If the AC Adapter EH-62F (available separately) (E97) is used, the COOLPIX P330 can be powered from an electrical outlet. Do not, under any circumstances, use an AC adapter other than the EH-62F. Failure to observe this precaution could result in overheating or damage to the camera.

Printing Individual Images

After connecting the camera to the printer correctly (E20), print pictures by following the procedure below.

1 Use the multi selector to choose the picture to

Print selection

be printed, and press the kbutton.

15/05

• Rotate the zoom control toward f(h) to display

2013

 

12 thumbnails, or toward g(i) to switch back to full-

NO. 32

frame playback mode.

 

32

2 Set the number of copies and paper size.

•Choose Copies and press the kbutton to set the number of copies (up to 9).

•Choose Paper size and press the kbutton to set the paper size (E24).

To prioritize the printer settings, select Default.

PictBridge

1 prints

Start print

Copies

Paper size

3 Choose Start print and press the kbutton.

PictBridge

4 prints

Start print

Copies

Paper size

4 Printing starts.

•The monitor display returns to that shown in step 1

when printing is complete.

 

Printing

 

2 / 4

 

 

•When printing is complete, turn the camera off and then disconnect the USB cable.

Cancel

Current print/total number of prints

Section Reference

E21