The Setup Menu

Eye-Fi Upload

Press the dbutton Mztab (A7) MEye-Fi upload

 

Option

Description

b

Enable

Upload images created by the camera to a preselected

(default setting)

destination when an Eye-Fi card is in the camera.

c

Disable

Images will not be uploaded.

BNotes on Eye-Fi Cards

•Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.

•Remove the Eye-Fi card from the camera in a place where the use of radio waves is prohibited. Signals may be transmitted even if Disable is selected.

•Refer to the instruction manual of your Eye-Fi card for more information. In the event of malfunction, contact the card manufacturer.

•The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions.

•The camera is not compatible with the endless memory function. When it is set on a computer, disable the function. If the endless memory function is enabled, the number of pictures taken may not be displayed correctly.

•Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless devices.

•Leaving the setting as Enable will result in the battery being depleted in a shorter period of time.

CEye-Fi Communication Indicator

The communication status of the Eye-Fi card in the camera can be confirmed on the monitor (A8).

•w: Eye-Fi upload is set to Disable.

•x(lights): Eye-Fi upload enabled; waiting to begin upload.

•x(flashes): Eye-Fi upload enabled; uploading data.

•z: An error occurred. The camera cannot control the Eye-Fi card.

Reverse Indicators

Press the dbutton Mztab (A7) MReverse indicators

Change the +/- display direction of the exposure indicator (A47) displayed when shooting mode is D.

The + side of the indicator is up and - side is down in the default setting.

Section Reference

E85