Features That Can Be Set Using the d(Menu) Button (Shooting Mode)

 

 

Option

Description

A

 

 

 

Higher ISO sensitivity allows you to take pictures of darker

 

 

 

 

subjects. Additionally, even with subjects of similar

 

 

 

 

brightness, pictures can be taken at faster shutter speeds,

 

 

 

ISO sensitivity 1

and blurring caused by camera shake and subject

E41

 

 

movement can be reduced. When ISO sensitivity is set to

 

 

 

Auto (default setting), the camera sets the ISO sensitivity

 

 

 

 

automatically.

 

 

 

 

• In D(Manual) mode, ISO sensitivity is fixed at ISO 80 if

 

 

 

 

Auto or Fixed range auto is selected.

 

 

 

Exposure

The exposure (brightness) can be changed automatically

E42

 

 

bracketing

during continuous shooting. The default setting is Off.

 

 

 

 

Set how the camera determines the focus area using the

 

 

 

AF area mode 1

autofocus to Face priority (A80), Auto, Manual,

E43

 

 

 

Center (normal), Center (wide), Subject tracking or

 

 

 

 

Target finding AF (A79).

 

Shooting

 

 

 

 

 

When Single AF (default setting) is selected, the camera

 

 

 

 

 

 

 

 

focuses only while the shutter-release button is pressed

 

 

 

Autofocus mode

halfway. When Full-time AF is selected, the camera

E47

Features

 

focuses even when the shutter-release button is not

 

 

 

 

 

pressed halfway. You may hear the sound of the camera

 

 

 

 

 

 

 

 

focusing.

 

 

 

 

 

 

 

 

Flash exp. comp.

Adjust the flash output. Use this option when the flash is

E48

 

 

 

too bright or too dark. The default setting is 0.0.

 

 

 

Noise reduction

Set the strength of the noise reduction function that is

E48

 

 

normally performed when recording the picture. The

 

 

filter

 

 

default setting is Normal.

 

 

 

 

 

 

 

 

 

 

 

 

 

Select On, Auto or Off (default setting) for the built-in ND

 

 

 

Built-in ND filter 1

filter. Set this feature to On in conditions such as when

E49

 

 

 

overexposure results from the subject being too bright, so

 

 

 

 

that the amount of light that enters the camera is reduced.

 

 

 

 

 

 

 

 

Active D-Lighting

Prevent loss of contrast details in highlights and shadows

E50

 

 

 

when shooting images. The default setting is Off.

 

 

 

Save user settings

The current settings are stored in mode dial i(A49).

49

 

 

Reset user settings

The settings saved to mode dial iare reset.

50

 

 

 

If the zoom control is operated when set to On, the camera

 

 

 

 

changes in steps to the focal length (equivalent to 35mm

 

 

 

 

[135] format of angle of view) of the zoom lens that is set in

 

 

 

Zoom memory

advance. The default setting is Off.

E51

 

 

• Select On and press the kbutton to display the screen

 

 

 

for focal length selection. Press the kbutton to switch

 

 

 

 

the On [w]/Off setting, then press the multi selector K

 

 

 

 

to apply the selection.

 

 

 

 

 

 

66