Nikon P330, P330 White Flash Exp. Comp, Noise Reduction Filter

Shooting Menu (A, B, Cor DMode)

Flash Exp. Comp.

Rotate the mode dial to A, B, C, Dor iMdbutton MA, B, C, Dor itab (A 7) MFlash exp. comp.

Flash exp. comp. option is used to adjust the flash output.

Use this option when the flash is too bright or too dark.

	Option	Description
	+0.3 to +2.0	The flash output is increased from +0.3 to +2.0 EV, in increments of 1/3
	+0.3 to +2.0	EV, to make the main subject of the frame appear brighter.
		EV, to make the main subject of the frame appear brighter.

	0.0 (default	The flash output is not adjusted.
	setting)	The flash output is not adjusted.
	setting)

	-0.3 to -2.0	The flash output is reduced from –0.3 to –2.0 EV, in increments of 1/3
	-0.3 to -2.0	EV, to prevent unwanted highlights or reflections.
		EV, to prevent unwanted highlights or reflections.

The icon for the current setting other than 0.0 is displayed on the monitor (A 8).

Section Reference

Noise Reduction Filter

Rotate the mode dial to A, B, C, Dor iMdbutton MA, B, C, Dor itab (A 7) MNoise reduction filter

Set the strength of the noise reduction function that is normally performed when recording the picture.

	Option	Description
e	High	Perform noise reduction at a level higher than the standard
e	High	strength.
		strength.

M	Normal (default	Perform noise reduction at the standard strength.
	setting)
l	Low	Perform noise reduction at a level lower than the standard
l	Low	strength.
		strength.

Noise reduction filter setting can be confirmed on the monitor (A 8).

E48