Scene Mode (Shooting Suited to Scenes)

Changing Scene Mode Settings

•Features That Can Be Set Using the Multi Selector ➝ A51

•Features That Can Be Set Using the d(Menu) Button

-Changing the Image Quality and Image Size ➝ A69

-Setup menu ➝ A103

Characteristics of Each Scene

•Use of a tripod is recommended in scene modes with Oindicated due to slow shutter speed.

•Set Vibration reduction in the setup menu (A103) to Off when using a tripod to stabilize the camera.

•For scene modes that use the flash, be sure to lower the K (flash pop-up) control to raise the flash before shooting (A52).

XNight landscape

•Press the dbutton to select YHand-held or ZTripod in Night landscape.

•YHand-held(default setting): This enables you to shoot with the minimum of camera shake and noise even when holding the camera by hand.

-When the shutter-release button is pressed all the way, pictures are shot continuously, and the camera combines these pictures to save a single picture.

-Once the shutter-release button is pressed all the way, hold the camera steady without moving it until a still picture is displayed. After taking a picture, do not turn the camera off before the monitor switches to the shooting screen.

-The angle of view (i.e., the area visible in the frame) seen in the saved image is narrower than that seen on the monitor at the time of shooting.

•ZTripod: Select this mode when the camera is stabilized, such as with a tripod.

-Vibration reduction is not used even if Vibration reduction in the setup menu (A103) is set to Normal or Active.

-Press the shutter-release button all the way to shoot a single picture at a slow shutter speed.

•When the shutter-release button is pressed halfway, the camera adjusts the focus to infinity. The focus area or focus indicator (A8) always lights in green.

Features Shooting

33