Only the desired portions of a recorded movie can be saved as a separate file (except for movies recorded with n1080/60i, q1080/50i, piFrame 540/30p or piFrame 540/25p).
1 Play back the movie to be edited and pause at the start point of the portion that is to be extracted (A97).
2 Use the multi selector Jor Kto choose I on the playback control, and press the k button.
•The movie editing screen is displayed.
7m42s
3 Press Hor Ito choose J(Choose start point) on the editing playback control.
•Rotate the multi selector or press Jor Kto adjust the start position.
•To cancel, press Hor Ito choose L(Back) and press the kbutton.
Choose start point
8m48s
4 Press Hor Ito choose K(Choose end point). |
|
|
|
|
|
| |
| Choose end point | ||
• Rotate the multi selector or press Jor Kto move the |
|
|
|
end point at the right end to the end position of the |
|
|
|
required section. |
|
|
|
• To check the playback of the movie in the specified range |
|
|
|
before saving it, choose c(Preview) and press the k |
|
|
|
| 5m52s | ||
button. During preview playback, the volume can be |
|
|
|
|
|
| |
adjusted with the zoom control f/g. Use the multi |
|
|
|
selector to fast forward or rewind. To stop the preview playback, press the kbutton again.
5 | After finishing the settings, press Hor Ito choose m(Save) and press | |
| the kbutton. |
|
6 | Choose Yes and press the kbutton. |
|
| • The edited movie is saved. | Save OK? |
|
| Yes |
|
| No |
Section Reference
E25