Nikon WP-N1 manual Final Leak Test, Immerse the case in water and check for leaks as

The Final Leak Test

After inserting the camera and closing the case, perform a final check for leaks.

DImportant!

Before use, be sure that the camera is functioning normally and that the case does not leak. Failure to check for leaks before use could result in irreparable damage to the camera.

Immerse the case in water and check for leaks as

described in “The Preliminary Leak Test” (0 5). After completing the test, open the case and check that the desiccant is dry and that no water has entered the case. If a leak is detected, imme-

diately dry the camera and case thoroughly and

check that the O-ring is intact and the case properly sealed. If the cause En of the leak can not be determined, take the case to a Nikon-authorized

service representative.

9