Nortel Networks 703t manual Removing the side cover, To remove the side panel

October 2006 Preinstallation requirements

Removing the side cover

Introduction

This section describes how to remove the server side cover so that you can work with the interior components. The side cover is on the server’s left side when the front of the server is facing you.

To remove the side panel

WARNING

Risk of personal injury

Be careful when you handle the sharp edges of the side panel and chassis to prevent personal injury.

CAUTION

Risk of equipment damage

„Use an ESD wrist strap to protect static-sensitive components.

„Place the server on its side to prevent the server from accidentally falling over. This provides greater stability. If you attempt to work with the server in its standing position, it may tip over when you work with the interior components.

703t Server Hardware Installation 39